heavy duty wood varnish
satin and dead flat finishes
for use on interior wood surfaces to give ultra-tough protection against chemicals, cleaning agents, alcohol and oils, and high wear
An ultra hard, high quality, fast drying varnish with a satin or dead flat finish that dries to a crystal clear film for interior surfaces requiring a high level of protection such as working surfaces and areas of high wear.
buy online here for UK delivery
at a glance product info
water wash up
16 hour cure
food and child safe
application and advice
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.
Ensure the product is well mixed but do not shake. Apply 2-3 coats of varnish, with a synthetic varnish brush. On new softwood and porous surfaces dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain. For a dead flat finish with high durability, apply two coats of satin followed by one of dead flat. Instructions in the technical data sheet must be followed.
Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.