woodstain
silky satin finish - 8 colours

satin

  • woodstain 1 litre
  • woodstain 2-5 litre
zoom  click for a larger image

a non-yellowing, quick drying decorative finish that completely protects against UV and weather damage

This coloured exterior varnish is a waterproof, microporous, UV resistant, decorative protection for exterior wood. Its unique polymer system gives a silky satin finish and highlights the natural grain of the wood.
It is suitable for exterior softwood and hardwood timber applications, giving a high level of protection and preservation.



30 percent off woodstain and woodstain oil

find a stockist buy online UK

buy online here for UK delivery



SKU : VEWSO1000
Price range : £20.79 to £48.25
£20.79
£14.55
+VAT
 
 
size

 
colour

 
quantity

 
go to basket

options
zoom click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
  • light oaklight oak
  • mahoganymahogany
  • oakoak
  • pinepine
  • redwoodredwood
  • rosewoodrosewood
  • teakteak
  • walnutwalnut


you may also be interested in this product



at a glance product info


windows • doors • cladding • fascia boards • all external woodwork


available in: 1 litre • 2.5 litre



drying time: Touch dry 1-2 hours • recoat time: 2 hours. Low temperature/high humidity can increase drying time. • coverage: 15 square metres per litre



application and advice

preparation


All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Treat new wood with a wood preservative to remove all traces of fungus and mould. Ensure pre-treatment is completely dry before application. Joints, end grain and glazing beads must be completely sealed. Water penetration into timber will produce unsightly water staining and promote fungal growth.

application


Instructions in the technical data sheet must be followed. Ensure the product is well mixed. Using a good quality brush, apply evenly using light brush strokes, following the grain of the wood. Keep a wet edge and avoid overlaps. Apply the first coat and allow to dry. On new wood dilute the first coat with 10% water. Sand lightly to obtain the best finish. Apply three coats.
To provide a dead flat finish, final coat with Polyvine Exterior Wood Varnish dead flat.

caution


Always apply to a test area before starting work. Care must be taken when applying in high temperature or direct sunlight as this will affect drying time. Do not apply when rain is imminent. Coating life will be reduced on horizontal surfaces and where the coating is in contact with the ground or pooled water.

storage


Protect from extremes of temperature during storage and application.

health, safety and the environment


Keep out of reach of children. Non-hazardous. Ensure good ventilation. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.



ask our expert