Spraying Polyvine 2K-POLY86 | Expert Trade Advice

Spraying Polyvine 2K-POLY86 | Expert Trade Advice. Expert advice on airless spraying, surface preparation and achieving a durable finish with Polyvine’s two-pack water-based polyurethane varnish.

A professional’s perspective on achieving the right finish

At Polyvine, we know that a great finish starts long before the first coat of varnish is applied. From careful preparation to choosing the right product and application method, it’s the attention to detail that makes all the difference.

That’s why we work closely with experienced trade professionals like Ashley Taylor of Taylor & Sons, a family-run painting and decorating business that takes real pride in the quality of its work.

Ash regularly works with our products and understands what it takes to achieve a professional finish that not only looks great but is built to last.

Here, Ash shares his experience of using Polyvine 2K-POLY86, including his preferred airless spray setup, preparation process and why he chooses a two-pack polyurethane varnish for projects where durability really matters.


Why we choose Polyvine 2K-POLY86

By Ashley Taylor, Taylor & Sons

At Taylor & Sons, we put a lot of time into the prep and finish of our work, so choosing the right protection matters. We want our work to look good when we hand it over and stand up to everyday use afterwards.

That’s why we use Polyvine 2K-POLY86 where we need that extra durability.

Being a two-pack, water-based polyurethane varnish, it offers added resistance to wear, stains and chemicals while keeping the timber’s natural character.

For us, it’s about matching the finish to how the customer will actually use it.

How we spray Polyvine 2K-POLY86

We apply Poly86 with our airless spray setup using a 310 FFLP (Fine Finish Low Pressure) tip, running between 1,200 and 1,600 psi, adjusting within that range to get the spray pattern and finish we’re after.

We take just as much care with the preparation as we do with the spraying. The surface needs to be properly prepared, clean and dust-free before we mix the varnish and hardener in line with Polyvine’s instructions.

We aim for a controlled, even coat, keeping our passes consistent and overlapping evenly, following the recommended coverage and drying times between coats.

All that prep deserves a proper finish.

Using 2K-POLY86 on commercial projects and floors

On commercial projects, appearance is only part of the job.

Floors and interior timber surfaces in busy shops, restaurants and other high-traffic spaces need to cope with regular footfall, cleaning and everyday knocks.

That’s where Poly86’s abrasion and chemical resistance really matter.

It gives us an option for projects where the coating needs to work harder, while still achieving the finish the customer wants.

Planning the application and allowing the correct curing time before returning the surface to use are just as important as the spraying itself.

Taking pride in every finish

We’re a family-run business and take pride in our work.

Whether it’s a piece of furniture or a commercial floor, we want to leave a finish that looks the part and is suited to the job.

Taylored to your finish.

Ashley Taylor | Taylor & Sons


Polyvine 2K-POLY86: Developed for demanding interiors

At Polyvine, we’re proud to work alongside skilled tradespeople like Ash, who understand that choosing the right varnish is about much more than appearance.

Their hands-on experience helps demonstrate how professional preparation, application techniques and high-performance coatings work together to deliver lasting results.

Polyvine 2K-POLY86 is our water-based, two-pack polyurethane varnish developed for interior surfaces that demand exceptional durability. Available in satin and dead flat finishes, it combines a hard-wearing protective coating with the natural appearance of the underlying surface.

It’s an ideal choice for demanding commercial environments, including sports halls, schools, restaurants, hotels and other high-traffic interiors.

Polyvine 2K-POLY86 at a glance

  • Type: Two-pack, water-based polyurethane varnish
  • Finishes: Satin and dead flat
  • Coverage: Approximately 10m² per litre
  • Drying time: Approximately 4 hours
  • Recoat time: Approximately 4 hours
  • Full cure: 72 hours
  • Recommended coats: 2–3
  • Mixing ratio: 10% hardener to varnish, as supplied in the kit

Always follow the current Polyvine product instructions and technical guidance, including preparation, mixing, application and curing requirements.

Frequently asked questions about spraying 2K-POLY86

Can you spray Polyvine 2K-POLY86?

Yes. Polyvine 2K-POLY86 can be applied using suitable spray equipment. Ashley Taylor of Taylor & Sons uses an airless spray system with a 310 FFLP tip, adjusting the pressure between 1,200 and 1,600 psi to achieve his desired spray pattern and finish. These are Ash’s working settings rather than universal settings for every sprayer or project.

What is a two-pack polyurethane varnish?

A two-pack polyurethane varnish consists of a varnish and a separate hardener that are mixed before application. The components react to create a highly durable protective coating with excellent resistance to wear, abrasion and chemicals.

Is Polyvine 2K-POLY86 suitable for commercial floors?

Yes. Polyvine 2K-POLY86 is designed for demanding interior applications, including commercial wooden floors in environments such as sports halls, restaurants, schools and hotels. Correct preparation, application and curing are essential to achieving the best results.

How long does Polyvine 2K-POLY86 take to cure?

Polyvine 2K-POLY86 reaches full cure after approximately 72 hours under recommended conditions. Drying and recoating times are approximately 4 hours, but the surface should not be subjected to demanding use before the appropriate curing period has been allowed.


Professional results start with the right preparation and protection

Whether you’re protecting a commercial floor, finishing interior timber or working on a demanding refurbishment project, choosing the right varnish and applying it correctly makes all the difference.

At Polyvine, we develop and manufacture our specialist coatings in Somerset, combining decades of varnish expertise with practical feedback from the professionals who use them.

Discover Polyvine 2K-POLY86 at polyvine.com and find out how our two-pack polyurethane varnish can help protect your next project.

Find a stockist

Polyvine products are stocked at all good decorators’ merchants across the UK. Search our directory to find your nearest stockist.

find a stockist near you
info@polyvine.co.uk +44 (0)1934 740305