Due to the Covid-19 emergency our factory and offices will be operating at a reduced level until further notice. We will be taking online orders but you should expect them to take longer to deliver than normal.
We will fully re-open only when the government tells us it is safe to do so.
We’re sorry for the inconvenience and we will be back in full force to do business with you in the future.
• metal surfaces • laminate • timber surfaces • tile • ceramic • glass • plastics
• interior • very hard and durable finish • 1-2 hour drying time • water resistant • stain resistant • heat resistant • water wash up
at a glance product info
water wash up
food and child safe
application and advice
Suitable for application mainly to non-porous surfaces, metal, glass, tile etc. but good results can be obtained on timber. All surfaces must be clean and free from dust, dirt, oil/resins and contamination.
Ensure the product is well mixed but do not shake. Use a good quality synthetic varnish brush and apply evenly using light brush strokes. Apply the first coat, to prime porous surfaces, dilute with 10% water. and allow to dry. Apply one or two further coats.
Always apply to a test area before starting work. Do not apply over uncured oil based paint. When applied over emulsion/latex paint, it is possible that the lacquer can draw certain stains through the paint, which would not otherwise be visible.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.