cascaphen
two part resin glue
  • cascaphen
zoom  click for a larger image

can stand continuous immersion in water

This super-professional, two part glue has been specially developed for waterproof exterior use and can stand continuous immersion in water. This glue is so waterproof - boat builders use it.
Developed for the marine industry this is the only completely waterproof adhesive that will withstand continual immersion in water.


find a stockist buy online abroad buy online UK
SKU : APP670
Price range : £31.87 to £31.87
£31.87
+VAT
 
 
size

 
quantity

 
go to basket

at a glance product info

  • interior - suitable for interior use interior
  • exterior - suitable for exterior use exterior
  • heat resistant - can accept hot cups and plates and is suitable for restaurant tables and bar tops heat resistant
  • D3 water resistance - completely waterproof adhesive that will withstand continous immersion in water D3 water resistance

laminating • marine • garden furniture and gates • laminated plastics • preservative treated and difficult timber • expanded polystyrene


available in: 670g



drying time: see datasheet • recoat time: N/A • coverage: as required



application and advice

preparation


Mixing: By weight - 100 parts of resin to 15 parts of hardener.
Liquid working life: After mixing, the glue mix commences to thicken but will stay usable for between 30 minutes at 30 degrees C and 4½ hours at 10 degrees C. Higher temperatures will shorten the working life, lower temperatures will prolong it.

application


The mixed glue should be applied to one or both surfaces, which should be brought together while the glue is still wet. Spreading both surfaces permits longer assembly times. The two surfaces must be held under pressure (by clamps, screws, pins etc.) until the glue sets (normally overnight). For best results, the glue should be allowed to set at normal room temperature (15-25 degrees C / 59-77 degrees F). Very low temperatures will slow the setting time of the glue and should be avoided.
Cleaning tools and equipment: When set, there is no known solvent for Polyproof glue. Liquid glue may be removed from tools and containers by washing in warm soapy water.

caution


Protection of the hands - resin glues can cause dermatitis. A wet swab should be used frequently to prevent the glue from setting on the hands.

storage


Store in a cool, dry place with the lids tightly closed.

health, safety and the environment


Contains: Resorcinol and Phenol UN. Number 2810
Harmful in contact with skin and if swallowed • Causes burns • Possible risk of irreversible effects • Do not breath vapour • Use only in well ventilated areas
Keep locked up and out of the reach of children • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice • Wear suitable protective clothing, gloves and eye protection • In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product.



ask our expert