• doors • wooden worktops • tabletops • furniture • kitchen cabinets • wood panelling
• interior • very fast drying • water resistant • heat resistant • abrasion resistant • water wash up
at a glance product info
16 hour cure
available in: 500ml • 1 litre • 4 litre
drying time: 30-60 minutes • recoat time: 1-2 hours • curing time: 16 hours • coverage: 10-20 square metres per litre
application and advice
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.
Ensure the product is well mixed but do not shake. Use a good quality synthetic varnish brush and apply evenly using light brush strokes. Apply the first coat and allow to dry. To prime porous surfaces dilute with 10% water. Apply one or two further coats.
Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats. Do not apply over uncured oil based paint. When using dead flat finish, for a high level of protection and stain resistance apply 2 coats of satin then 1 coat of dead flat.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.