woodstain
silky satin finish
  • woodstain 1 litre
zoom  click for a larger image
a non-yellowing, quick drying decorative finish that completely protects against UV and weather damage
A waterproof, microporous,
UV resistant, decorative protection for exterior wood. A unique polymer system gives a silky satin finish and highlights the natural grain of the wood. It is suitable for exterior softwood and hardwood timber applications, giving a high level of UV resistance, waterproofing and preservation.
Available in 8 woodgrain finishes.
To provide a dead flat finish, final coat with Polyvine Clear Exterior Varnish dead flat

ideal for
• windows • doors • cladding • fascia boards • all external woodwork

unique qualities
• waterproof • does not blister or peel • high solids • UV protective filters • microporous • biocides protect
against algae, mildew and fungal attack

options
zoom click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
  • light oaklight oak  
  • mahoganymahogany  
  • oakoak  
  • pinepine  
  • redwoodredwood  
  • rosewoodrosewood  
  • teakteak  
  • walnutwalnut  

find a stockist shop online

at a glance product info

  • exterior
    exterior
  • water resistant
    water resistant
  • UV filter protection
    UV filter protection
  • quick drying
    quick drying
  • microporous
    microporous
  • biocide boost
    biocide boost
  • nano technology
    nano technology
  • does not blister or peel
    does not blister or peel

available in: 500ml • 1 litre • 2.5 litre


drying time: Touch dry 12 hours • recoat time: 12 hours. Low temperature/high humidity can increase drying time. • coverage: 16-20 square metres per litre

application and advice

preparation
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Treat new wood with a wood preservative to remove all traces of fungus and mould. Ensure pre-treatment is completely dry before application. Joints, end grain and glazing beads must be completely sealed. Water penetration into timber will produce unsightly water staining and promote fungal growth.

application
Instructions in the technical data sheet must be followed. Ensure the product is well mixed. Using a good quality brush, apply evenly using light brush strokes, following the grain of the wood. Keep a wet edge and avoid overlaps. Apply the first coat and allow to dry. On new wood dilute the first coat with 10% water. Sand lightly to obtain the best finish. Apply three coats.

caution
Always apply to a test area before starting work. Care must be taken when applying in high temperature or direct sunlight as this will affect drying time. Do not apply when rain is imminent. Coating life will be reduced on horizontal surfaces and where the coating is in contact with the ground or pooled water.

storage
Protect from extremes of temperature during storage and application.

health, safety and the environment
Keep out of reach of children. Non-hazardous. Ensure good ventilation. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.



ask our expert

find the right product for the job - adhesives woodstain oil wood varnish woodoil hickson decor antislip hickson decor waxcoat hickson decor woodstain woodstain woodstain oil wood varnish woodoil hickson decor antislip hickson decor waxcoat hickson decor woodstain woodstain