polyproof
the ultimate waterproof adhesive
  • polyproof
zoom  click for a larger image
can stand continuous immersion in water
This super-professional, two part glue has been specially developed for waterproof exterior use and can stand continuous immersion in water. This glue is so waterproof - boat builders use it.
Developed for the marine industry this is the only completely waterproof adhesive that will withstand continual immersion in water.

ideal for
• structural timber • laminated roof members • timber in constant contact with water • timber in contact with the ground • arches for bridge work • concrete formers • marine craft construction • bonding of preservative treated timber • bonding of difficult timber i.e. teak and iroko

unique qualities
• completely waterproof • withstands extreme weathering • withstands complete water immersion

find a stockist shop online

at a glance product info

  • exterior
    exterior
  • D3 water resistance
    D3 water resistance

available in: 670g


drying time: see datasheet • recoat time: N/A • coverage: as required

application and advice

preparation
Mixing: By weight - 100 parts of resin to 15 parts of hardener.
Liquid working life: After mixing, the glue mix commences to thicken but will stay usable for between 30 minutes at 30 degrees C and 4½ hours at 10 degrees C. Higher temperatures will shorten the working life, lower temperatures will prolong it.

application
The mixed glue should be applied to one or both surfaces, which should be brought together while the glue is still wet. Spreading both surfaces permits longer assembly times. The two surfaces must be held under pressure (by clamps, screws, pins etc.) until the glue sets (normally overnight). For best results, the glue should be allowed to set at normal room temperature (15-25 degrees C / 59-77 degrees F). Very low temperatures will slow the setting time of the glue and should be avoided.
Cleaning tools and equipment: When set, there is no known solvent for Polyproof glue. Liquid glue may be removed from tools and containers by washing in warm soapy water.

caution
Protection of the hands - resin glues can cause dermatitis. A wet swab should be used frequently to prevent the glue from setting on the hands.

storage
Store in a cool, dry place with the lids tightly closed.

health, safety and the environment
Contains: Resorcinol and Phenol UN. Number 2810
Harmful in contact with skin and if swallowed • Causes burns • Possible risk of irreversible effects • Do not breath vapour • Use only in well ventilated areas
Keep locked up and out of the reach of children • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice • Wear suitable protective clothing, gloves and eye protection • In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product.



ask our expert

view or download a datasheet

polyproof
the ultimate waterproof adhesive

find the right product for the job - adhesives fast grab wood glue contact adhesive polyproof cascamite cascamite exterior wood glue multi surface glue interior wood glue fast grab wood glue contact adhesive polyproof cascamite cascamite exterior wood glue multi surface glue interior wood glue