antibacterial varnish
dead flat and satin
  • antibacterial varnish dead flat  500ml
  • antibacterial varnish dead flat 1 litre
  • antibacterial varnish dead flat 4 litre.jpg
  • antibacterial varnish satin  500ml
  • antibacterial varnish satin 1 litre
  • antibacterial varnish satin 4 litre.jpg
zoom  click for a larger image
play

howto video

unique antibacterial, antifungal varnish for use in environments where hygiene and durability are key
A high performance, tough acrylic resin based anti-bacterial and anti-fungal varnish for use in environments where hygiene and durability are key.
Silver has been used for centuries for its natural sterilising properties. The innovative SteriTouch® carrier mechanisms allow this antimicrobial effect to be harnessed and delivered in an efficient and controlled manner. SteriTouch® is there to stay. It won’t lose efficiency due to leaching or migration and is unaffected by scratches and abrasion.

ideal for
• paintwork • wallpaper • plaster • fabric
• interior wood • most other interior surfaces

unique qualities
• superior microbial and chemical resistance
• non-leaching anti-microbial agents
• protects against water, stains and mild abrasion • withstands cleaning
• lifelong anti-microbial properties
• brush applied • easy to repair • long-lasting

options
zoom click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
  • clear dead flatclear dead flat
  • clear satinclear satin

find a stockist shop online

at a glance product info

  • interior
    interior
  • water resistant
    water resistant
  • stain resistant
    stain resistant
  • heat resistant
    heat resistant
  • quick drying
    quick drying
  • microporous
    microporous
  • biocide boost
    biocide boost

available in: 500ml • 1 litre • 4 litre


drying time: 15 minutes to 1 hour depending on temperature • coverage: 15-20 square metres per litre

application and advice

preparation
All surfaces must be clean and free from dust, dirt, oil and contamination.

application
Ensure the product is well mixed. Apply thinly 1 or 2 coats of varnish and brush out well. On porous surfaces dilute the first coat with 10% water. For a higher level of protection when using dead flat; first apply 1 coat of satin

caution
Always test for clarity over dark colours. Application over emulsion paint can draw contaminants through the paint film. Should not be applied over uncured oil based products. Test for compatibility before application.

storage
Protect from extremes of temperature during storage and application.

health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.



ask our expert

find the right product for the job - adhesives stone and brick protector wood dye lacquer extra pale varnish decorators varnish anti bacterial varnish clear primer heavy duty floor varnish wax finish varnish heavy duty wood varnish stone and brick protector wood dye lacquer extra pale varnish decorators varnish anti bacterial varnish clear primer heavy duty floor varnish wax finish varnish heavy duty wood varnish