heavy duty wood varnish
satin and dead flat finishes
  •  heavy duty wood varnish   satin 1 litre
  •  heavy duty wood varnish   satin 4 litre
  • heavy duty wood varnish   satin  500ml
  • heavy duty wood varnish dead flat  1 litre
  • heavy duty wood varnish dead flat  500ml
  • heavy duty wood varnish dead flat 4 litre
zoom  click for a larger image
highly durable, fast drying, fast 16 hour curing, crystal clear protection
An ultra hard, high quality varnish with a satin or dead flat finish that dries to a crystal clear film for interior surfaces requiring a high level of protection such as working surfaces and areas of
high wear.

ideal for
• doors • wooden worktops • tabletops • furniture • kitchen cabinets • wood panelling

unique qualities
• interior • very fast drying • water resistant • heat resistant • abrasion resistant • water wash up

options
zoom click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
  • dead flatdead flat
  • satinsatin

find a stockist shop online

at a glance product info

  • interior
    interior
  • water resistant
    water resistant
  • stain resistant
    stain resistant
  • abrasion resistant
    abrasion resistant
  • heat resistant
    heat resistant
  • chemical resistant
    chemical resistant
  • ultra hard
    ultra hard
  • quick drying
    quick drying
  • 16 hour cure
    16 hour cure

available in: 500ml • 1 litre • 4 litre


drying time: 30-60 minutes • recoat time: 1-2 hours • curing time: 16 hours • coverage: 10-20 square metres per litre

application and advice

preparation
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.

application
Ensure the product is well mixed but do not shake. Use a good quality synthetic varnish brush and apply evenly using light brush strokes. Apply the first coat and allow to dry. To prime porous surfaces dilute with 10% water. Apply one or two further coats.

caution
Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats. Do not apply over uncured oil based paint. When using dead flat finish, for a high level of protection and stain resistance apply 2 coats of satin then 1 coat of dead flat.

storage
Protect from extremes of temperature during storage and application.

health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.



ask our expert

view or download a datasheet

heavy duty wood varnish
satin and dead flat finishes

find the right product for the job - adhesives stone and brick protector wood dye lacquer extra pale varnish decorators varnish anti bacterial varnish clear primer heavy duty floor varnish wax finish varnish heavy duty wood varnish stone and brick protector wood dye lacquer extra pale varnish decorators varnish anti bacterial varnish clear primer heavy duty floor varnish wax finish varnish heavy duty wood varnish