click for a larger image 
howto video
available finishes; gloss for a shiny finish, satin for depth and a soft sheen, dead flat for a completely shine free surface.
ideal for
• internal wood • fabric • paintwork • wallpaper • plaster • murals • mouldings
unique qualities
• interior and exterior • quick drying • water resistant • stain resistant • abrasion resistant • microporous • UV filter protection
click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
dead flat
gloss
satin
at a glance product info
interior
exterior
water resistant
stain resistant
abrasion resistant
UV filter protection
quick drying
available in: gloss - 500ml, 1 litre, 4 litre • satin and dead flat - 500ml, 1 litre, 2 litre, 4 litre
drying time: 15 minutes to 1 hour depending on temperature • coverage: 15-20 square metres per litre
application and advice
preparation
All surfaces must be clean and free from dust, dirt, oil and contamination.
application
Ensure the product is well mixed but do not shake. Thinly apply 2 to 3 coats of varnish. On porous surfaces dilute the first coat with 10% water. When using dead flat finish, for a high level of protection and stain resistance, apply 2 coats of satin then 1 coat of dead flat.
caution
Always test for clarity over dark colours. Application over emulsion
paint can draw contaminants through the paint film. Should not be applied over uncured oil based products. Test for compatibility before application. Not suitable for exterior bare timber or vinyl wall covering.
storage
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.
