The exceptionally high solids content ensure that it’s the fastest, strongest adhesive of its type. Used correctly it will bond most woods in 10 minutes and be ready to handle in 30 minutes. Bonds stronger
than the wood itself in less than 2 hours! Suitable for all woods and joinery, assembly of doors, window frames and furniture.
Not suitable for continuous immersion in water.
• cabinet making • general joinery • doors • window frames • furniture • general joinery • kitchens
• water resistant to D3 classification • interior use • exterior use • low timber staining - will not stain • creep resistant • dries clear • contains no inert fillers • suitable for radio frequency (R-F) cure • water based
at a glance product info
high particle content
D3 water resistance
available in: 125ml • 250ml • 500ml • 1 litre • 5 litre
drying time: tack time: 10 minutes • curing time: 2-4 hours • coverage: as required
application and advice
For best results use on clean, dry, bare wood.
Apply a thin, even film to both surfaces. Assemble the joint immediately, applying continuous pressure, preferably with a clamp.
Use a damp cloth to remove excess adhesive. Use between 5oc and 30oc.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous, non-flammable. Contact with eyes or skin -
wash immediately with water. Remove excess from tools before washing in warm water. Do not empty into drains or watercourses. Supervise use by children.